pub struct CollationReorderingV1<'data> {
pub min_high_no_reorder: u32,
pub reorder_table: ZeroVec<'data, u8>,
pub reorder_ranges: ZeroVec<'data, u32>,
}
Expand description
Script reordering data
Fields
min_high_no_reorder: u32
Limit of last reordered range. 0 if no reordering or no split bytes.
Comment from ICU4C’s collationsettings.h
reorder_table: ZeroVec<'data, u8>
256-byte table for reordering permutation of primary lead bytes; NULL if no reordering. A 0 entry at a non-zero index means that the primary lead byte is “split” (there are different offsets for primaries that share that lead byte) and the reordering offset must be determined via the reorderRanges.
Comment from ICU4C’s collationsettings.h
reorder_ranges: ZeroVec<'data, u32>
Primary-weight ranges for script reordering, to be used by reorder(p) for split-reordered primary lead bytes.
Each entry is a (limit, offset) pair. The upper 16 bits of the entry are the upper 16 bits of the exclusive primary limit of a range. Primaries between the previous limit and this one have their lead bytes modified by the signed offset (-0xff..+0xff) stored in the lower 16 bits.
CollationData::makeReorderRanges() writes a full list where the first range (at least for terminators and separators) has a 0 offset. The last range has a non-zero offset. minHighNoReorder is set to the limit of that last range.
In the settings object, the initial ranges before the first split lead byte are omitted for efficiency; they are handled by reorder(p) via the reorderTable. If there are no split-reordered lead bytes, then no ranges are needed.
Comment from ICU4C’s collationsettings.h
; names refer to
ICU4C.
Trait Implementations
sourceimpl<'data> Bake for CollationReorderingV1<'data>
impl<'data> Bake for CollationReorderingV1<'data>
sourcefn bake(&self, env: &CrateEnv) -> TokenStream
fn bake(&self, env: &CrateEnv) -> TokenStream
Returns a TokenStream
that would evaluate to self
. Read more
sourceimpl<'data> Clone for CollationReorderingV1<'data>
impl<'data> Clone for CollationReorderingV1<'data>
sourcefn clone(&self) -> CollationReorderingV1<'data>
fn clone(&self) -> CollationReorderingV1<'data>
Returns a copy of the value. Read more
1.0.0 · sourcefn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
Performs copy-assignment from source
. Read more
sourceimpl<'data> Debug for CollationReorderingV1<'data>
impl<'data> Debug for CollationReorderingV1<'data>
sourceimpl<'de, 'data> Deserialize<'de> for CollationReorderingV1<'data> where
'de: 'data,
impl<'de, 'data> Deserialize<'de> for CollationReorderingV1<'data> where
'de: 'data,
sourcefn deserialize<__D>(
__deserializer: __D
) -> Result<CollationReorderingV1<'data>, <__D as Deserializer<'de>>::Error> where
__D: Deserializer<'de>,
fn deserialize<__D>(
__deserializer: __D
) -> Result<CollationReorderingV1<'data>, <__D as Deserializer<'de>>::Error> where
__D: Deserializer<'de>,
Deserialize this value from the given Serde deserializer. Read more
sourceimpl<'data> PartialEq<CollationReorderingV1<'data>> for CollationReorderingV1<'data>
impl<'data> PartialEq<CollationReorderingV1<'data>> for CollationReorderingV1<'data>
sourcefn eq(&self, other: &CollationReorderingV1<'data>) -> bool
fn eq(&self, other: &CollationReorderingV1<'data>) -> bool
This method tests for self
and other
values to be equal, and is used
by ==
. Read more
sourcefn ne(&self, other: &CollationReorderingV1<'data>) -> bool
fn ne(&self, other: &CollationReorderingV1<'data>) -> bool
This method tests for !=
.
sourceimpl<'data> Serialize for CollationReorderingV1<'data>
impl<'data> Serialize for CollationReorderingV1<'data>
sourcefn serialize<__S>(
&self,
__serializer: __S
) -> Result<<__S as Serializer>::Ok, <__S as Serializer>::Error> where
__S: Serializer,
fn serialize<__S>(
&self,
__serializer: __S
) -> Result<<__S as Serializer>::Ok, <__S as Serializer>::Error> where
__S: Serializer,
Serialize this value into the given Serde serializer. Read more
sourceimpl<'a> Yokeable<'a> for CollationReorderingV1<'static>
impl<'a> Yokeable<'a> for CollationReorderingV1<'static>
type Output = CollationReorderingV1<'a>
type Output = CollationReorderingV1<'a>
This type MUST be Self
with the 'static
replaced with 'a
, i.e. Self<'a>
sourcefn transform(
&'a self
) -> &'a <CollationReorderingV1<'static> as Yokeable<'a>>::Output
fn transform(
&'a self
) -> &'a <CollationReorderingV1<'static> as Yokeable<'a>>::Output
This method must cast self
between &'a Self<'static>
and &'a Self<'a>
. Read more
sourcefn transform_owned(
self
) -> <CollationReorderingV1<'static> as Yokeable<'a>>::Output
fn transform_owned(
self
) -> <CollationReorderingV1<'static> as Yokeable<'a>>::Output
This method must cast self
between Self<'static>
and Self<'a>
. Read more
sourceunsafe fn make(
this: <CollationReorderingV1<'static> as Yokeable<'a>>::Output
) -> CollationReorderingV1<'static>
unsafe fn make(
this: <CollationReorderingV1<'static> as Yokeable<'a>>::Output
) -> CollationReorderingV1<'static>
This method can be used to cast away Self<'a>
’s lifetime. Read more
sourcefn transform_mut<F>(&'a mut self, f: F) where
F: 'static + for<'b> FnOnce(&'b mut <CollationReorderingV1<'static> as Yokeable<'a>>::Output),
fn transform_mut<F>(&'a mut self, f: F) where
F: 'static + for<'b> FnOnce(&'b mut <CollationReorderingV1<'static> as Yokeable<'a>>::Output),
This method must cast self
between &'a mut Self<'static>
and &'a mut Self<'a>
,
and pass it to f
. Read more
sourceimpl<'zf, 'zf_inner> ZeroFrom<'zf, CollationReorderingV1<'zf_inner>> for CollationReorderingV1<'zf>
impl<'zf, 'zf_inner> ZeroFrom<'zf, CollationReorderingV1<'zf_inner>> for CollationReorderingV1<'zf>
sourcefn zero_from(
this: &'zf CollationReorderingV1<'zf_inner>
) -> CollationReorderingV1<'zf>
fn zero_from(
this: &'zf CollationReorderingV1<'zf_inner>
) -> CollationReorderingV1<'zf>
Clone the other C
into a struct that may retain references into C
.
impl<'a> IsCovariant<'a> for CollationReorderingV1<'a>
impl<'data> StructuralPartialEq for CollationReorderingV1<'data>
Auto Trait Implementations
impl<'data> RefUnwindSafe for CollationReorderingV1<'data>
impl<'data> Send for CollationReorderingV1<'data>
impl<'data> Sync for CollationReorderingV1<'data>
impl<'data> Unpin for CollationReorderingV1<'data>
impl<'data> UnwindSafe for CollationReorderingV1<'data>
Blanket Implementations
sourceimpl<T> BorrowMut<T> for T where
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
const: unstable · sourcefn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
sourceimpl<T> Serialize for T where
T: Serialize + ?Sized,
impl<T> Serialize for T where
T: Serialize + ?Sized,
fn erased_serialize(&self, serializer: &mut dyn Serializer) -> Result<Ok, Error>
sourceimpl<T> ToOwned for T where
T: Clone,
impl<T> ToOwned for T where
T: Clone,
type Owned = T
type Owned = T
The resulting type after obtaining ownership.
sourcefn clone_into(&self, target: &mut T)
fn clone_into(&self, target: &mut T)
toowned_clone_into
)Uses borrowed data to replace owned data, usually by cloning. Read more